Smooth-On Mold Star 15 Silicone Moldmaking Rubber (Pint Unit)

$33.49

TEAR RESISTANT – Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*
HEAT RESISTANT – Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys
CURING- Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding.

$33.49

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers.MIX RATIO: 1:1 by volume; POT LIFE: 50 mins; DEMOLD TIME: 4 hrs; SHORE A: 15; COLOR: Green

TEAR RESISTANT – Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*
HEAT RESISTANT – Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys
CURING- Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding.
VACCUM DEGASSING – Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber
MOLD PREFORMACE – The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment

Specification: Smooth-On Mold Star 15 Silicone Moldmaking Rubber (Pint Unit)

Package Dimensions

Shipping Weight

Item model number

Brand

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Smooth-On Mold Star 15 Silicone Moldmaking Rubber (Pint Unit)”

Your email address will not be published. Required fields are marked *

Smooth-On Mold Star 15 Silicone Moldmaking Rubber (Pint Unit)
Smooth-On Mold Star 15 Silicone Moldmaking Rubber (Pint Unit)

$33.49

Sigenadi
Logo
Login/Register access is temporary disabled